xdotool

Tartalom

 

Adatok

Licenc:
Verziószám: 3.20
Fejlesztő/tulajdonos:

Rövid leírás:

Az xdotool linux parancs manual oldala és súgója. Az xdotool segítségével programozottan (vagy manuálisan) szimulálható a billentyűzet bevitel és az egérműveletek: áthelyezhetjük és átméretezhetjük az ablakokat stb. Mindezt az X11 XTEST kiterjesztésével és más Xlib funkciókkal valósítja meg. Van némi támogatás az Extended Window Manager Tippekhez (más néven EWMH vagy NetWM). További információkért lásd az "EXTENDED WINDOW MANAGER HINTS" részt.

 

 

Man oldal kimenet

man xdotool
XDOTOOL(1)                                                                             XDOTOOL(1)

NAME
       xdotool - command-line X11 automation tool

SYNOPSIS
       xdotool cmd args...

       Notation: Some documentation uses [window] to denote an optional window argument. This
       case means that the argument, if not present, will default to "%1". See "WINDOW STACK" for
       what "%1" means.

DESCRIPTION
       xdotool lets you programmatically (or manually) simulate keyboard input and mouse
       activity, move and resize windows, etc. It does this using X11's XTEST extension and other
       Xlib functions.

       There is some support for Extended Window Manager Hints (aka EWMH or NetWM).  See the
       "EXTENDED WINDOW MANAGER HINTS" section for more information.

KEYBOARD COMMANDS
       key [options] keystroke [keystroke ...]
           Options:

           --window window
               Send keystrokes to a specific window id. You can use "WINDOW STACK" references
               like "%1" and "%@" here. If there is a window stack, then "%1" is the default,
               otherwise the current window is used.

               See also: "SENDEVENT NOTES" and "WINDOW STACK"

           --clearmodifiers
               Clear modifiers before sending keystrokes. See CLEARMODIFIERS below.

           --delay milliseconds
               Delay between keystrokes. Default is 12ms.

           Type a given keystroke. Examples being "alt+r", "Control_L+J", "ctrl+alt+n",
           "BackSpace".

           Generally, any valid X Keysym string will work. Multiple keys are separated by '+'.
           Aliases exist for "alt", "ctrl", "shift", "super", and "meta" which all map to Foo_L,
           such as Alt_L and Control_L, etc.

           In cases where your keyboard doesn't actually have the key you want to type, xdotool
           will automatically find an unused keycode and use that to type the key.

           With respect to "COMMAND CHAINING", this command consumes the remainder of the
           arguments or until a new xdotool command is seen, because no xdotool commands are
           valid keystrokes.

           Example: Send the keystroke "F2"
            xdotool key F2

           Example: Send 'a' with an accent over it (not on English keyboards, but still works
           with xdotool)
            xdotool key Aacute

           Example: Send ctrl+l and then BackSpace as separate keystrokes:
            xdotool key ctrl+l BackSpace

           Example: Send ctrl+c to all windows matching title 'gdb' (See "COMMAND CHAINING")
            xdotool search --name gdb key ctrl+c

       keydown [options] keystroke
           Same as above, except only keydown (press) events are sent.

       keyup keystroke
           Same as above, except only keyup (release) events are sent.

       type [options] something to type
           Options:

           --window windowid
               Send keystrokes to a specific window id. See "SENDEVENT NOTES" below. The default,
               if no window is given, depends on the window stack. If the window stack is empty
               the current window is typed at using XTEST. Otherwise, the default is "%1" (see
               "WINDOW STACK").

           --delay milliseconds
               Delay between keystrokes. Default is 12ms.

           --clearmodifiers
               Clear modifiers before sending keystrokes. See CLEARMODIFIERS below.

           Types as if you had typed it. Supports newlines and tabs (ASCII newline and tab). Each
           keystroke is separated by a delay given by the --delay option.

           With respect to "COMMAND CHAINING", this command consumes the remainder of the
           arguments and types them. That is, no commands can chain after 'type'.

           Example: to type 'Hello world!' you would do:
            xdotool type 'Hello world!'

MOUSE COMMANDS
       mousemove [options] x y OR 'restore'
           Move the mouse to the specific X and Y coordinates on the screen.

           You can move the mouse to the previous location if you specify 'restore' instead of an
           X and Y coordinate. Restoring only works if you have moved previously in this same
           command invocation. Further, it does not work with the --window option.

           For example, to click the top-left corner of the screen and move the mouse to the
           original position before you moved it, use this:
            xdotool mousemove 0 0 click 1 mousemove restore

           --window WINDOW
               Specify a window to move relative to. Coordinates 0,0 are at the top left of the
               window you choose.

               "WINDOW STACK" references are valid here, such as %1 and %@. Though, using %@
               probably doesn't make sense.

           --screen SCREEN
               Move the mouse to the specified screen to move to. This is only useful if you have
               multiple screens and ARE NOT using Xinerama.

               The default is the current screen. If you specify --window, the --screen flag is
               ignored.

           --polar
               Use polar coordinates. This makes 'x' an angle (in degrees, 0-360, etc) and 'y'
               the distance.

               Rotation starts at 'up' (0 degrees) and rotates clockwise: 90 = right, 180 = down,
               270 = left.

               The origin defaults to the center of the current screen. If you specify a
               --window, then the origin is the center of that window.

           --clearmodifiers
               See CLEARMODIFIERS

           --sync
               After sending the mouse move request, wait until the mouse is actually moved. If
               no movement is necessary, we will not wait. This is useful for scripts that depend
               on actions being completed before moving on.

               Note: We wait until the mouse moves at all, not necessarily that it actually
               reaches your intended destination. Some applications lock the mouse cursor to
               certain regions of the screen, so waiting for any movement is better in the
               general case than waiting for a specific target.

       mousemove_relative [options] x y
           Move the mouse x,y pixels relative to the current position of the mouse cursor.

           --polar
               Use polar coordinates. This makes 'x' an angle (in degrees, 0-360, etc) and 'y'
               the distance.

               Rotation starts at 'up' (0 degrees) and rotates clockwise: 90 = right, 180 = down,
               270 = left.

           --sync
               After sending the mouse move request, wait until the mouse is actually moved. If
               no movement is necessary, we will not wait. This is useful for scripts that depend
               on actions being completed before moving on.

               Note that we wait until the mouse moves at all, not necessarily that it actually
               reaches your intended destination. Some applications lock the mouse cursor to
               certain regions of the screen, so waiting for any movement is better in the
               general case than waiting for a specific target.

           --clearmodifiers
               See CLEARMODIFIERS

       click [options] button
           Send a click, that is, a mousedown followed by mouseup for the given button with a
           short delay between the two (currently 12ms).

           Buttons generally map this way: Left mouse is 1, middle is 2, right is 3, wheel up is
           4, wheel down is 5.

           --clearmodifiers
               Clear modifiers before clicking. See CLEARMODIFIERS below.

           --repeat REPEAT
               Specify how many times to click. Default is 1. For a double-click, use '--repeat
               2'

           --delay MILLISECONDS
               Specify how long, in milliseconds, to delay between clicks. This option is not
               used if the --repeat flag is set to 1 (default).

           --window WINDOW
               Specify a window to send a click to. See "SENDEVENT NOTES" below for caveats. Uses
               the current mouse position when generating the event.

               The default, if no window is given, depends on the window stack. If the window
               stack is empty the current window is typed at using XTEST. Otherwise, the default
               is "%1" (see "WINDOW STACK").

       mousedown [options] button
           Same as click, except only a mouse down is sent.

       mouseup [options] button
           Same as click, except only a mouse up is sent.

       getmouselocation [--shell]
           Outputs the x, y, screen, and window id of the mouse cursor. Screen numbers will be
           nonzero if you have multiple monitors and are not using Xinerama.

           --shell
               This makes getmouselocation output shell data you can eval. Example:

                % xdotool getmouselocation --shell
                X=880
                Y=443
                SCREEN=0
                WINDOW=16777250

                % eval $(xdotool getmouselocation --shell)
                % echo $X,$Y
                714,324

       behave_screen_edge [options] where command ...
           Bind an action to events when the mouse hits the screen edge or corner.

           Options are:

           --delay MILLISECONDS
               Delay in milliseconds before running the command. This allows you to require a
               given edge or corner to be held for a short period before your command will run.
               If you leave the edge or corner before the delay expires then the time will reset.

           --quiesce MILLISECONDS
               Delay in milliseconds before the next command will run. This helps prevent
               accidentally running your command extra times; especially useful if you have a
               very short --delay (like the default of 0).

           Event timeline

            * Mouse hits an edge or corner.
            * If delay is nonzero, the mouse must stay in this edge or corner until delay time expires.
            * If still in the edge/corner, trigger.
            * If quiesce is nonzero, then there is a cool-down period where the next
              trigger cannot occur

           Valid 'where' values are:

           left
           top-left
           top
           top-right
           right
           bottom-left
           bottom
           bottom-right

           Examples:
            # Activate google-chrome when you move the mouse to the bottom-left corner:
            xdotool behave_screen_edge bottom-left \
              search --class google-chrome windowactivate

            # Go to the next workspace (right). Known to work in GNOME (metacity and compiz)
            xdotool behave_screen_edge --delay 500 bottom-right key XF86Forward

            # Activate firefox and do a web search in a new tab for text in your clipboard
            xdotool behave_screen_edge --delay 1000 top-left \
                search --classname Navigator \
                windowactivate --sync key --delay 250 ctrl+t ctrl+k ctrl+v Return

WINDOW COMMANDS
       search [options] pattern
           Search for windows with titles, names, or classes with a regular expression pattern.
           The output is line-delimited list of X window identifiers. If you are using "COMMAND
           CHAINING", the search command will only write window ids to stdout if it is the last
           (or only) command in the chain; otherwise, it is silent.

           The result is saved to the window stack for future chained commands. See "WINDOW
           STACK" and "COMMAND CHAINING" for details.

           The default options are "--name --class --classname" (unless you specify one one or
           more of --name --class or --classname).

           The options available are:

           --class
               Match against the window class.

           --classname
               Match against the window classname.

           --maxdepth N
               Set recursion/child search depth. Default is -1, meaning infinite. 0 means no
               depth, only root windows will be searched. If you only want toplevel windows, set
               maxdepth of 1 (or 2, depending on how your window manager does decorations).

           --name
               Match against the window name. This is the same string that is displayed in the
               window titlebar.

           --onlyvisible
               Show only visible windows in the results. This means ones with map state
               IsViewable.

           --pid PID
               Match windows that belong to a specific process id. This may not work for some X
               applications that do not set this metadata on its windows.

           --screen N
               Select windows only on a specific screen. Default is to search all screens. Only
               meaningful if you have multiple displays and are not using Xinerama.

           --desktop N
               Only match windows on a certain desktop. 'N' is a number. The default is to search
               all desktops.

           --limit N
               Stop searching after finding N matching windows. Specifying a limit will help
               speed up your search if you only want a few results.

               The default is no search limit (which is equivalent to '--limit 0')

           --title
               DEPRECATED. See --name.

           --all
               Require that all conditions be met. For example:

                xdotool search --all --pid 1424 --name "Hello World"

               This will match only windows that have "Hello World" as a name and are owned by
               pid 1424.

           --any
               Match windows that match any condition (logically, 'or'). This is on by default.
               For example:

                xdotool search --any --pid 1424 --name "Hello World"

               This will match any windows owned by pid 1424 or windows with name "Hello World"

           --sync
               Block until there are results. This is useful when you are launching an
               application and want to wait until the application window is visible.  For
               example:

                google-chrome &
                xdotool search --sync --onlyvisible --class "google-chrome"

       selectwindow
           Get the window id (for a client) by clicking on it. Useful for having scripts query
           you humans for what window to act on. For example, killing a window by clicking on it:

            xdotool selectwindow windowkill

       behave window action command ...
           Bind an action to an event on a window. This lets you run additional xdotool commands
           whenever a matched event occurs.

           The command run as a result of the behavior is run with %1 being the window that was
           acted upon. Examples follow after the event list.

           The following are valid events:

           mouse-enter
               Fires when the mouse enters a window. This is similar to 'mouse over' events in
               javascript, if that helps.

           mouse-leave
               Fires when the mouse leaves a window. This is the opposite of 'mouse-enter'

           mouse-click
               Fires when the mouse is clicked. Specifically, when the mouse button is released.

           focus
               Fires when the window gets input focus.

           blur
               Fires when the window loses focus.

           Examples:

            # Print the cursor location whenever the mouse enters a currently-visible
            # window:
            xdotool search --onlyvisible . behave %@ mouse-enter getmouselocation

            # Print the window title and pid whenever an xterm gets focus
            xdotool search --class xterm behave %@ focus getwindowname getwindowpid

            # Emulate focus-follows-mouse
            xdotool search . behave %@ mouse-enter windowfocus

       getwindowpid [window]
           Output the PID owning a given window. This requires effort from the application owning
           a window and may not work for all windows. This uses _NET_WM_PID property of the
           window. See "EXTENDED WINDOW MANAGER HINTS" below for more information.

           If no window is given, the default is '%1'. If no windows are on the stack, then this
           is an error. See "WINDOW STACK" for more details.

           Example: Find the PID for all xterms:
            xdotool search --class xterm getwindowpid %@

       getwindowname [window]
           Output the name of a given window, also known as the title. This is the text displayed
           in the window's titlebar by your window manager.

           If no window is given, the default is '%1'. If no windows are on the stack, then this
           is an error. See "WINDOW STACK" for more details.

       getwindowgeometry [options] [window]
           Output the geometry (location and position) of a window. The values include: x, y,
           width, height, and screen number.

           --shell
               Output values suitable for 'eval' in a shell.

       getwindowfocus [-f]
           Prints the window id of the currently focused window. Saves the result to the window
           stack. See "WINDOW STACK" for more details.

           If the current window has no WM_CLASS property, we assume it is not a normal top-level
           window and traverse up the parents until we find a window with a WM_CLASS set and
           return that window id.

           If you really want the window currently having focus and don't care if it has a
           WM_CLASS setting, then use 'getwindowfocus -f'

       windowsize [options] [window] width height
           Set the window size of the given window. If no window is given, %1 is the default.
           See "WINDOW STACK" and "COMMAND CHAINING" for more details.

           Percentages are valid for width and height. They are relative to the geometry of the
           screen the window is on. For example, to make a window the full width of the screen,
           but half height:

            xdotool windowsize I<window> 100% 50%

           Percentages are valid with --usehints and still mean pixel-width relative to the
           screen size.

           The options available are:

           --usehints
               Use window sizing hints (when available) to set width and height.  This is useful
               on terminals for setting the size based on row/column of text rather than pixels.

           --sync
               After sending the window size request, wait until the window is actually resized.
               If no change is necessary, we will not wait. This is useful for scripts that
               depend on actions being completed before moving on.

               Note: Because many window managers may ignore or alter the original resize
               request, we will wait until the size changes from its original size, not necessary
               to the requested size.

           Example: To set a terminal to be 80x24 characters, you would use:
            xdotool windowsize --usehints some_windowid 80 24

       windowmove [options] [window] x y
           Move the window to the given position. If no window is given, %1 is the default. See
           "WINDOW STACK" and "COMMAND CHAINING" for more details.

           If the given x coordinate is literally 'x', then the window's current x position will
           be unchanged. The same applies for 'y'.

           Examples:

            xdotool getactivewindow windowmove 100 100    # Moves to 100,100
            xdotool getactivewindow windowmove x 100      # Moves to x,100
            xdotool getactivewindow windowmove 100 y      # Moves to 100,y
            xdotool getactivewindow windowmove 100 y      # Moves to 100,y

           Percentages are valid for width and height. They are relative to the geometry of the
           screen the window is on. For example, to make a window the full width of the screen,
           but half height:

            xdotool windowmove I<window> 100% 50%

           --sync
               After sending the window move request, wait until the window is actually moved. If
               no movement is necessary, we will not wait. This is useful for scripts that depend
               on actions being completed before moving on.

           --relative
               Make movement relative to the current window position.

       windowfocus [options] [window]
           Focus a window. If no window is given, %1 is the default. See "WINDOW STACK" and
           "COMMAND CHAINING" for more details.

           Uses XSetInputFocus which may be ignored by some window managers or programs.

           --sync
               After sending the window focus request, wait until the window is actually focused.
               This is useful for scripts that depend on actions being completed before moving
               on.

       windowmap [options] [window]
           Map a window. In X11 terminology, mapping a window means making it visible on the
           screen. If no window is given, %1 is the default. See "WINDOW STACK" and "COMMAND
           CHAINING" for more details.

           --sync
               After requesting the window map, wait until the window is actually mapped
               (visible). This is useful for scripts that depend on actions being completed
               before moving on.

       windowminimize [options] [window]
           Minimize a window. In X11 terminology, this is called 'iconify.'  If no window is
           given, %1 is the default. See "WINDOW STACK" and "COMMAND CHAINING" for more details.

           --sync
               After requesting the window minimize, wait until the window is actually minimized.
               This is useful for scripts that depend on actions being completed before moving
               on.

       windowraise [window_id=%1]
           Raise the window to the top of the stack. This may not work on all window managers. If
           no window is given, %1 is the default. See "WINDOW STACK" and "COMMAND CHAINING" for
           more details.

       windowreparent [source_window] destination_window
           Reparent a window. This moves the source_window to be a child window of
           destination_window. If no source is given, %1 is the default.  "WINDOW STACK" window
           references (like %1) are valid for both source_window and destination_window See
           "WINDOW STACK" and "COMMAND CHAINING" for more details.

       windowclose [window]
           Close a window. This action will destroy the window, but will not try to kill the
           client controlling it. If no window is given, %1 is the default. See "WINDOW STACK"
           and "COMMAND CHAINING" for more details.

       windowkill [window]
           Kill a window. This action will destroy the window and kill the client controlling it.
           If no window is given, %1 is the default. See WINDOW STACK and "COMMAND CHAINING" for
           more details.

       windowunmap [options] [window_id=%1]
           Unmap a window, making it no longer appear on your screen. If no window is given, %1
           is the default. See "WINDOW STACK" and "COMMAND CHAINING" for more details.

           --sync
               After requesting the window unmap, wait until the window is actually unmapped
               (hidden). This is useful for scripts that depend on actions being completed before
               moving on.

       set_window [options] [windowid=%1]
           Set properties about a window. If no window is given, %1 is the default. See "WINDOW
           STACK" and "COMMAND CHAINING" for more details.

           Options:

           --name newname
               Set window WM_NAME (the window title, usually)

           --icon-name newiconname
               Set window WM_ICON_NAME (the window title when minimized, usually)

           --role newrole
               Set window WM_WINDOW_ROLE

           --classname newclassname
               Set window class name (not to be confused with window class)

           --class newclass
               Set window class (not to be confused with window class name)

           --urgency value
               Set window urgency hint. If the value is 1, the window will be marked urgent, and
               the window manager will somehow highlight it for the user's attention.  If the
               value is 0, the window will be marked non-urgent.

           --overrideredirect value
               Set window's override_redirect value. This value is a hint to the window manager
               for whether or not it should be managed. If the redirect value is 0, then the
               window manager will draw borders and treat this window normally. If the value is
               1, the window manager will ignore this window.

               If you change this value, your window manager may not notice the change until the
               window is mapped again, so you may want to issue 'windowunmap' and 'windowmap' to
               make the window manager take note.

DESKTOP AND WINDOW COMMANDS
       These commands follow the EWMH standard. See the section "EXTENDED WINDOW MANAGER HINTS"
       for more information.

       windowactivate [options] [window]
           Activate the window. This command is different from windowfocus: if the window is on
           another desktop, we will switch to that desktop. It also uses a different method for
           bringing the window up. I recommend trying this command before using windowfocus, as
           it will work on more window managers.

           If no window is given, %1 is the default. See "WINDOW STACK" and "COMMAND CHAINING"
           for more details.

           --sync
               After sending the window activation, wait until the window is actually activated.
               This is useful for scripts that depend on actions being completed before moving
               on.

       getactivewindow
           Output the current active window. This command is often more reliable than
           getwindowfocus. The result is saved to the window stack. See "WINDOW STACK" for more
           details.

       set_num_desktops number
           Changes the number of desktops or workspaces.

       get_num_desktops
           Output the current number of desktops.

       get_desktop_viewport [--shell]
           Report the current viewport's position. If --shell is given, the output is friendly to
           shell eval.

           Viewports are sometimes used instead of 'virtual desktops' on some window managers. A
           viewport is simply a view on a very large desktop area.

       set_desktop_viewport x y
           Move the viewport to the given position. Not all requests will be obeyed - some
           windowmangers only obey requests that align to workspace boundaries, such as the
           screen size.

           For example, if your screen is 1280x800, you can move to the 2nd workspace by doing:
            xdotool set_desktop_viewport 1280 0

       set_desktop [options] desktop_number
           Change the current view to the specified desktop.

           --relative
               Use relative movements instead of absolute. This lets you move relative to the
               current desktop.

       get_desktop
           Output the current desktop in view.

       set_desktop_for_window [window] desktop_number
           Move a window to a different desktop. If no window is given, %1 is the default. See
           "WINDOW STACK" and "COMMAND CHAINING" for more details.

       get_desktop_for_window [window]
           Output the desktop currently containing the given window. Move a window to a different
           desktop. If no window is given, %1 is the default. See WINDOW STACK and "COMMAND
           CHAINING" for more details.

MISCELLANEOUS COMMANDS
       exec [options] command [...]
           Execute a program. This is often useful when combined with behave_screen_edge to do
           things like locking your screen.

           Options:

           --sync
               Block until the child process exits. The child process exit status is then passed
               to the parent process (xdotool) which copies it.

           Examples:
            # Lock the screen when the mouse sits in the top-right corner
            xdotool behave_screen_edge --delay 1000 top-right \
              exec gnome-screensaver-command --lock
            # Substitute 'xscreensaver-command -lock' if you use that program.

            # The following will fail to move the mouse because we use '--sync' and
            # /bin/false exits nonzero:
            xdotool exec --sync /bin/false mousemove 0 0

            # This succeeds, though, since we do not use --sync on the exec command.
            xdotool exec /bin/false mousemove 0 0

       sleep seconds
           Sleep for a specified period. Fractions of seconds (like 1.3, or 0.4) are valid, here.

SCRIPTS
       xdotool can read a list of commands via stdin or a file if you want. A script will fail
       when any command fails.

       Truthfully, 'script' mode isn't fully fleshed out and may fall below your expectations. If
       you have suggestions, please email the list or file a bug (See CONTACT).

       Scripts can use positional arguments (Represented by $1, $2, ...) and environment
       variables (like $HOME or $WINDOWID). Quoting arguments should work as expected.

       Scripts are processed for parameter and environment variable expansion and then run as if
       you had invoked xdotool with the entire script on one line (using COMMAND CHAINING).

       •   Read commands from a file:

            xdotool filename

       •   Read commands from stdin:

            xdotool -

       •   Read commands from a redirected file

            xdotool - < myfile

       You can also write scripts that only execute xdotool. Example:

        #!/usr/local/bin/xdotool
        search --onlyvisible --classname $1

        windowsize %@ $2 $3
        windowraise %@

        windowmove %1 0 0
        windowmove %2 $2 0
        windowmove %3 0 $3
        windowmove %4 $2 $3

       This script will take all windows matched by the classname query given by arg1 ($1) and
       sizes/moves them into a 2x2 grid with windows sized by the 2nd and 3rd parameters.

       Here's an example usage:

        % ./myscript xterm 600 400

       Running it like this will take 4 visible xterms, raise them, and move them into a 2x2 tile
       grid with each window 600x400 pixels in size.

CLEARMODIFIERS
       Any command taking the --clearmodifiers flag will attempt to clear any active input
       modifiers during the command and restore them afterwards.

       For example, if you were to run this command:
        xdotool key a

       The result would be 'a' or 'A' depending on whether or not you were holding the shift key
       on your keyboard. Often it is undesirable to have any modifiers active, so you can tell
       xdotool to clear any active modifiers.

       The order of operations if you hold shift while running 'xdotool key --clearmodifiers a'
       is this:

       1. Query for all active modifiers (finds shift, in this case)
       2. Try to clear shift by sending 'key up' for the shift key
       3. Runs normal 'xdotool key a'
       4. Restore shift key by sending 'key down' for shift

       The --clearmodifiers flag can currently clear of the following:

       •   any key in your active keymap that has a modifier associated with it.  (See
           xmodmap(1)'s 'xmodmap -pm' output)

       •   mouse buttons (1, 2, 3, 4, and 5)

       •   caps lock

SENDEVENT NOTES
       If you are trying to send key input to a specific window, and it does not appear to be
       working, then it's likely your application is ignoring the events xdotool is generating.
       This is fairly common.

       Sending keystrokes to a specific window uses a different API than simply typing to the
       active window. If you specify 'xdotool type --window 12345 hello' xdotool will generate
       key events and send them directly to window 12345.  However, X11 servers will set a
       special flag on all events generated in this way (see XEvent.xany.send_event in X11's
       manual). Many programs observe this flag and reject these events.

       It is important to note that for key and mouse events, we only use XSendEvent when a
       specific window is targeted. Otherwise, we use XTEST.

       Some programs can be configured to accept events even if they are generated by xdotool.
       Seek the documentation of your application for help.

       Specific application notes (from the author's testing): * Firefox 3 seems to ignore all
       input when it does not have focus.  * xterm can be configured while running with
       ctrl+leftclick, 'Allow SendEvents' * gnome-terminal appears to accept generated input by
       default.

WINDOW STACK
       Certain commands (search, getactivewindow, getwindowfocus) will find windows for you.
       These results generally printed to stdout, but they are also saved to memory for future
       use during the lifetime of the xdotool process. See "COMMAND CHAINING" for more
       information.

       The only modifications support for the window stack are to replace it. That is, two of two
       sequential searches, only the last one's results will be the window stack.

COMMAND CHAINING
       xdotool supports running multiple commands on a single invocation. Generally, you'll start
       with a search command (see "WINDOW STACK") and then perform a set of actions on those
       results.

       To query the window stack, you can use special notation "%N" where N is a number or the
       '@' symbol. If %N is given, the Nth window will be selected from the window stack.
       Generally you will only want the first window or all windows.  Note that the order of
       windows in the window stack corresponds to the window stacking order, i.e. the bottom-most
       window will be reported first (see XQueryTree(3)). Thus the order of the windows in the
       window stack may not be consistent across invocations.

       The notation described above is used as the "window" argument for any given command.

       For example, to resize all xterms to 80x24:

        xdotool search --class xterm -- windowsize --usehints %@ 80 24

       Resize move the current window:

        xdotool getactivewindow windowmove 0 0

       In all cases, the default window argument, if omitted, will default to "%1". It is
       obviously an error if you omit the window argument and the window stack is empty. If you
       try to use the window stack and it is empty, it is also an error.

       To activate the first firefox window found:

        xdotool search --class firefox windowactivate

       These would error:

        xdotool windowactivate
        xdotool windowactivate %1
        xdotool windowactivate %@

       When xdotool exits, the current window stack is lost.

       Additionally, commands that modify the "WINDOW STACK" will not print the results if they
       are not the last command. For example:

        # Output the active window:
        % xdotool getactivewindow
        20971533

        # Output the pid of the active window, but not the active window id:
        % xdotool getactivewindow getwindowpid
        4686

EXTENDED WINDOW MANAGER HINTS
       The following pieces of the EWMH standard are supported:

       _NET_SUPPORTED
           Asks the window manager what is supported

       _NET_CURRENT_DESKTOP
           Query and set the current desktop. Support for this enables these commands:
           "set_desktop", "get_desktop".

       _NET_WM_DESKTOP
           Query and set what desktop a window is living in. Support for this enables these
           commands: "set_desktop_for_window", "get_desktop_for_window".

       _NET_ACTIVE_WINDOW
           Allows you to query and set the active window by asking the window manager to bring it
           forward. Support for this enables these commands: "windowactivate", "getactivewindow".

       _NET_WM_PID
           This feature is application dependent, not window-manager dependent. Query the PID
           owning a given window. Support for this enables these commands: "getwindowpid".

SUPPORTED FEATURES
       xdotool (and libxdo) will try to function under all circumstances. However, there may be
       some cases where functionality is not provided by your X server or by your window manager.
       In these cases, xdotool will try to detect and tell you if an action requires a feature
       not currently supported by your system.

       For window-manager specific features, see "EXTENDED WINDOW MANAGER HINTS".

       XTEST
           If your X server does not support XTEST, then some typing and mouse movement features
           may not work. Specifically, typing and mouse actions that act on the "current window"
           (window 0 in libxdo) are unlikely to work.

           In most cases, XTEST is a feature you can enable on your X server if it is not enabled
           by default.

           You can see the list of supported X extensions by typing 'xdpyinfo' and looking the
           text 'number of extensions: ...'

BUGS
       Typing unusual symbols under non-us keybindings is known to occasionally send the wrong
       character.

SEE ALSO
       xprop(1), xwininfo(1),

       Project site: <http://www.semicomplete.com/projects/xdotool>

       Source code and Issues: <https://github.com/jordansissel/xdotool>

       EWMH specification: <http://standards.freedesktop.org/wm-spec/wm-spec-1.3.html>

CONTACT
       Please send questions to xdotool-users@googlegroups.com. File bugs and feature requests at
       the following URL:

       <https://github.com/jordansissel/xdotool/issues>

       Alternately, if you prefer email, feel free to file bugs by emailing the list.  What works
       for you :)

AUTHOR
       xdotool was written by Jordan Sissel.

       This manual page was written originally by Daniel Kahn Gillmor <dkg@fifthhorseman.net> for
       the Debian project (but may be used by others). It is maintained by Jordan Sissel.

       Patches, ideas, and other contributions by many, nice folks. See the CHANGELIST file for
       who provided what.

                                            2018-06-11                                 XDOTOOL(1)

 

 

Súgó kimenet

xdotool help
Available commands:
  getactivewindow
  getwindowfocus
  getwindowname
  getwindowpid
  getwindowgeometry
  getdisplaygeometry
  search
  selectwindow
  help
  version
  behave
  behave_screen_edge
  click
  getmouselocation
  key
  keydown
  keyup
  mousedown
  mousemove
  mousemove_relative
  mouseup
  set_window
  type
  windowactivate
  windowfocus
  windowkill
  windowclose
  windowmap
  windowminimize
  windowmove
  windowraise
  windowreparent
  windowsize
  windowunmap
  set_num_desktops
  get_num_desktops
  set_desktop
  get_desktop
  set_desktop_for_window
  get_desktop_for_window
  get_desktop_viewport
  set_desktop_viewport
  exec
  sleep

 

Kapcsolódó tartalom