btrfs-quota

Tartalom

 

Adatok

Licenc:
Verziószám:
Fejlesztő/tulajdonos:

Rövid leírás:

A btrfs-quota linux parancs manual oldala és súgója. A btrfs-quota alatti parancsok befolyásolják a btrfs fájlrendszer kvótáinak globális állapotát. A kvótacsoportokat (qgroups) a bgrofs qgroup (8) alparancs kezeli.

 

 

Man oldal kimenet

man btrfs-quota
BTRFS-QUOTA(8)                          Btrfs Manual                          BTRFS-QUOTA(8)

NAME
       btrfs-quota - control the global quota status of a btrfs filesystem

SYNOPSIS
       btrfs quota <subcommand> <args>

DESCRIPTION
       The commands under btrfs quota are used to affect the global status of quotas of a
       btrfs filesystem. The quota groups (qgroups) are managed by the subcommand btrfs
       qgroup(8).

           Note
           Qgroups are different than the traditional user quotas and designed to track
           shared and exclusive data per-subvolume. Please refer to the section HIERARCHICAL
           QUOTA GROUP CONCEPTS for a detailed description.

   PERFORMANCE IMPLICATIONS
       When quotas are activated, they affect all extent processing, which takes a
       performance hit. Activation of qgroups is not recommended unless the user intends to
       actually use them.

   STABILITY STATUS
       The qgroup implementation has turned out to be quite difficult as it affects the core
       of the filesystem operation. Qgroup users have hit various corner cases over time,
       such as incorrect accounting or system instability. The situation is gradually
       improving and issues found and fixed.

HIERARCHICAL QUOTA GROUP CONCEPTS
       The concept of quota has a long-standing tradition in the Unix world. Ever since
       computers allow multiple users to work simultaneously in one filesystem, there is the
       need to prevent one user from using up the entire space. Every user should get his
       fair share of the available resources.

       In case of files, the solution is quite straightforward. Each file has an owner
       recorded along with it, and it has a size. Traditional quota just restricts the total
       size of all files that are owned by a user. The concept is quite flexible: if a user
       hits his quota limit, the administrator can raise it on the fly.

       On the other hand, the traditional approach has only a poor solution to restrict
       directories. At installation time, the harddisk can be partitioned so that every
       directory (eg. /usr, /var/, ...) that needs a limit gets its own partition. The
       obvious problem is that those limits cannot be changed without a reinstallation. The
       btrfs subvolume feature builds a bridge. Subvolumes correspond in many ways to
       partitions, as every subvolume looks like its own filesystem. With subvolume quota,
       it is now possible to restrict each subvolume like a partition, but keep the
       flexibility of quota. The space for each subvolume can be expanded or restricted on
       the fly.

       As subvolumes are the basis for snapshots, interesting questions arise as to how to
       account used space in the presence of snapshots. If you have a file shared between a
       subvolume and a snapshot, whom to account the file to? The creator? Both? What if the
       file gets modified in the snapshot, should only these changes be accounted to it? But
       wait, both the snapshot and the subvolume belong to the same user home. I just want
       to limit the total space used by both! But somebody else might not want to charge the
       snapshots to the users.

       Btrfs subvolume quota solves these problems by introducing groups of subvolumes and
       let the user put limits on them. It is even possible to have groups of groups. In the
       following, we refer to them as qgroups.

       Each qgroup primarily tracks two numbers, the amount of total referenced space and
       the amount of exclusively referenced space.

       referenced
           space is the amount of data that can be reached from any of the subvolumes
           contained in the qgroup, while

       exclusive
           is the amount of data where all references to this data can be reached from
           within this qgroup.

   SUBVOLUME QUOTA GROUPS
       The basic notion of the Subvolume Quota feature is the quota group, short qgroup.
       Qgroups are notated as level/id, eg. the qgroup 3/2 is a qgroup of level 3. For level
       0, the leading 0/ can be omitted. Qgroups of level 0 get created automatically when a
       subvolume/snapshot gets created. The ID of the qgroup corresponds to the ID of the
       subvolume, so 0/5 is the qgroup for the root subvolume. For the btrfs qgroup command,
       the path to the subvolume can also be used instead of 0/ID. For all higher levels,
       the ID can be chosen freely.

       Each qgroup can contain a set of lower level qgroups, thus creating a hierarchy of
       qgroups. Figure 1 shows an example qgroup tree.

                                     +---+
                                     |2/1|
                                     +---+
                                    /     \
                              +---+/       \+---+
                              |1/1|         |1/2|
                              +---+         +---+
                             /     \       /     \
                       +---+/       \+---+/       \+---+
           qgroups     |0/1|         |0/2|         |0/3|
                       +-+-+         +---+         +---+
                         |          /     \       /     \
                         |         /       \     /       \
                         |        /         \   /         \
           extents       1       2            3            4

       Figure1: Sample qgroup hierarchy

       At the bottom, some extents are depicted showing which qgroups reference which
       extents. It is important to understand the notion of referenced vs exclusive. In the
       example, qgroup 0/2 references extents 2 and 3, while 1/2 references extents 2-4, 2/1
       references all extents.

       On the other hand, extent 1 is exclusive to 0/1, extent 2 is exclusive to 0/2, while
       extent 3 is neither exclusive to 0/2 nor to 0/3. But because both references can be
       reached from 1/2, extent 3 is exclusive to 1/2. All extents are exclusive to 2/1.

       So exclusive does not mean there is no other way to reach the extent, but it does
       mean that if you delete all subvolumes contained in a qgroup, the extent will get
       deleted.

       Exclusive of a qgroup conveys the useful information how much space will be freed in
       case all subvolumes of the qgroup get deleted.

       All data extents are accounted this way. Metadata that belongs to a specific
       subvolume (i.e. its filesystem tree) is also accounted. Checksums and extent
       allocation information are not accounted.

       In turn, the referenced count of a qgroup can be limited. All writes beyond this
       limit will lead to a Quota Exceeded error.

   INHERITANCE
       Things get a bit more complicated when new subvolumes or snapshots are created. The
       case of (empty) subvolumes is still quite easy. If a subvolume should be part of a
       qgroup, it has to be added to the qgroup at creation time. To add it at a later time,
       it would be necessary to at least rescan the full subvolume for a proper accounting.

       Creation of a snapshot is the hard case. Obviously, the snapshot will reference the
       exact amount of space as its source, and both source and destination now have an
       exclusive count of 0 (the filesystem nodesize to be precise, as the roots of the
       trees are not shared). But what about qgroups of higher levels? If the qgroup
       contains both the source and the destination, nothing changes. If the qgroup contains
       only the source, it might lose some exclusive.

       But how much? The tempting answer is, subtract all exclusive of the source from the
       qgroup, but that is wrong, or at least not enough. There could have been an extent
       that is referenced from the source and another subvolume from that qgroup. This
       extent would have been exclusive to the qgroup, but not to the source subvolume. With
       the creation of the snapshot, the qgroup would also lose this extent from its
       exclusive set.

       So how can this problem be solved? In the instant the snapshot gets created, we
       already have to know the correct exclusive count. We need to have a second qgroup
       that contains all the subvolumes as the first qgroup, except the subvolume we want to
       snapshot. The moment we create the snapshot, the exclusive count from the second
       qgroup needs to be copied to the first qgroup, as it represents the correct value.
       The second qgroup is called a tracking qgroup. It is only there in case a snapshot is
       needed.

   USE CASES
       Below are some usecases that do not mean to be extensive. You can find your own way
       how to integrate qgroups.

       SINGLE-USER MACHINE
           Replacement for partitions

           The simplest use case is to use qgroups as simple replacement for partitions.
           Btrfs takes the disk as a whole, and /, /usr, /var, etc. are created as
           subvolumes. As each subvolume gets it own qgroup automatically, they can simply
           be restricted. No hierarchy is needed for that.

           Track usage of snapshots

           When a snapshot is taken, a qgroup for it will automatically be created with the
           correct values. Referenced will show how much is in it, possibly shared with
           other subvolumes. Exclusive will be the amount of space that gets freed when the
           subvolume is deleted.

       MULTI-USER MACHINE
           Restricting homes

           When you have several users on a machine, with home directories probably under
           /home, you might want to restrict /home as a whole, while restricting every user
           to an individual limit as well. This is easily accomplished by creating a qgroup
           for /home , eg. 1/1, and assigning all user subvolumes to it. Restricting this
           qgroup will limit /home, while every user subvolume can get its own (lower)
           limit.

           Accounting snapshots to the user

           Let’s say the user is allowed to create snapshots via some mechanism. It would
           only be fair to account space used by the snapshots to the user. This does not
           mean the user doubles his usage as soon as he takes a snapshot. Of course, files
           that are present in his home and the snapshot should only be accounted once. This
           can be accomplished by creating a qgroup for each user, say 1/UID. The user home
           and all snapshots are assigned to this qgroup. Limiting it will extend the limit
           to all snapshots, counting files only once. To limit /home as a whole, a higher
           level group 2/1 replacing 1/1 from the previous example is needed, with all user
           qgroups assigned to it.

           Do not account snapshots

           On the other hand, when the snapshots get created automatically, the user has no
           chance to control them, so the space used by them should not be accounted to him.
           This is already the case when creating snapshots in the example from the previous
           section.

           Snapshots for backup purposes

           This scenario is a mixture of the previous two. The user can create snapshots,
           but some snapshots for backup purposes are being created by the system. The
           user’s snapshots should be accounted to the user, not the system. The solution is
           similar to the one from section Accounting snapshots to the user, but do not
           assign system snapshots to user’s qgroup.

SUBCOMMAND
       disable <path>
           Disable subvolume quota support for a filesystem.

       enable <path>
           Enable subvolume quota support for a filesystem.

       rescan [-s] <path>
           Trash all qgroup numbers and scan the metadata again with the current config.

           Options

           -s
               show status of a running rescan operation.

           -w
               wait for rescan operation to finish(can be already in progress).

EXIT STATUS
       btrfs quota returns a zero exit status if it succeeds. Non zero is returned in case
       of failure.

AVAILABILITY
       btrfs is part of btrfs-progs. Please refer to the btrfs wiki
       http://btrfs.wiki.kernel.org for further details.

SEE ALSO
       mkfs.btrfs(8), btrfs-subvolume(8), btrfs-qgroup(8)

Btrfs v4.20.1                            01/23/2019                           BTRFS-QUOTA(8)

 

 

Súgó kimenet

sudo btrfs quota
usage: btrfs quota <command> [options] <path>

    btrfs quota enable <path>
        Enable subvolume quota support for a filesystem.
    btrfs quota disable <path>
        Disable subvolume quota support for a filesystem.
    btrfs quota rescan [-sw] <path>
        Trash all qgroup numbers and scan the metadata again with the current config.

manage filesystem quota settings

 

Kapcsolódó tartalom